Drawbars, hitches and more...

	Drawbar support assembly Code: B236 Weight: 60.00 Price: $60.00 Quantity in Basket: none
Original drawbar support assembly (JD part number AB3507R) for your John Deere B serial number serial number 186,134 and up.
	Lift link handle Code: 60122 Weight: 1.00 Price: $19.95 Quantity in Basket: none
Nice reproduction casting! This lift link handle is for your 3-point hitch. Although not pictured, this handle does include the mounting bolt as well. Nice reproduction casting!
	Sway chain assembly for your 800 and 801 hitch! Code: A175 Weight: 10.00 Price: $65.00 Quantity in Basket: none
Reproduction sway chain assembly for your 800/801 hitch. This assembly comes complete with chain, large clevis with drilled pin, small clevis with drilled pin and both cotter pins, complete as shown. These sway chains come painted from the manufacturer but it's not a pretty finish. You'll want to blast them and paint them to match your tractor.
	Drawbar lift link pin with spring - BACK IN STOCK!!!! Code: MT115 Weight: 0.50 Price: $12.50 Quantity in Basket: none
These have been hard if not impossible to find as a good used part so we're pleased to offer them to you now as a high quality reproduction part! Designed for the M and MT, you'll need four per tractor or simply replace the ones you may have damaged or missing.
	Drawbar lift link - short -OUT OF STOCK - BE BACK SOON!! Code: M126 Weight: 3.00 Price: $35.00 Quantity in Basket: none
Are you missing the lift link chains on your M? Finally, an affordable solution to this problem. Nice reproduction chain, comes complete as shown, replaces part number AM470T. Designed for your John Deere M with 24 inch rear tires.
	Sway chain anchor - Great New Product! Code: 420122 Weight: 1.00 Price: $25.00 Quantity in Basket: none
Until now, this part has been almost impossible to find. Commonly broken, good used ones were far and few between. We're pleased to offer to you a new reproduction casting of the orignal part M2876T. This is a sway chain anchor, bolts to the drawbar of your 40-W, 420-W, 430-W, 435, 440 and 1010. It also fits the 420-I. Each tractor requires two of this anchor, please be sure and order enough to do your tractor. We have a very limited supply of this part. Keep watching the online store for more reproduction hitch and drawbar parts, over the next few weeks we'll be introducing even more new parts!
	Leveling Crank lock Code: 420123 Weight: 1.00 Price: $25.00 Quantity in Basket: none
We're pleased to bring to you this brand new product for your tractor. This is a nice reproduction casting from the original part number M2735T. After 45+ years of use on the tractor, this part is commonly broken or damaged and hard to find as a good used part. Designed to fit the 3 point hitch on your 40, 320, 330, 420, 430, 435 or 440. We have reproduced this part in very limited quantities so supplies are limited. If you need a part not listed in the online store don't hesitate to drop me an e-mail. We still have thousands of used and new parts to add to the online store!
	Drawbar - It's Brand new! First Time Ever Available! Code: A506 Weight: 30.00 Price: $99.95 Quantity in Basket: none
You've spent countless hours restoring your tractor and hundreds if not thousands of dollars in parts and labor. Having said that, have you looked at your drawbar? Does it look 70 years old? All of the tractors that we restore here in our own shop, get a full drawbar restortation. After spending countless hours fabricating new parts or trying to salvage used parts, we decided it was about time to make new drawbars so everyone could have a nice, new drawbar. This new product is the result of our efforts. This drawbar is a reproduction of John Deere part number AA956R and fits the following tractors: Unstyled A (432,497-476,999) and Styled A (477,000-561,902) Drawbar will be shipped to you in bare steel, ready for your prep and paint. We're very pleased to bring these to you, we hope it makes your restoration go just a bit smoother and more fun! Need one for your B? Be sure and check out part number B322!
	Drawbar - Holy Cow - It's Brand New! Code: B322 Weight: 25.00 Price: $99.95 Quantity in Basket: none
You've spent countless hours restoring your tractor and hundreds if not thousands of dollars in parts and labor. Having said that, have you looked at your drawbar? Does it look 70 years old? All of the tractors that we restore here in our own shop, get a full drawbar restortation. After spending countless hours fabricating new parts or trying to salvage used parts, we decided it was about time to make new drawbars so everyone could have a nice, new drawbar. This new product is the result of our efforts. This drawbar is a reproduction of John Deere part number AA956R and fits the following tractors: Unstyled B (1,000-59,999) and Styled B (60,000-149,699) Drawbar will be shipped to you in bare steel, ready for your prep and paint. We're very pleased to bring these to you, we hope it makes your restoration go just a bit smoother and more fun! Need one for your A? Be sure and check out part number A506!
	H1 Moldboard Plow Beam Bumper Code: H407 Weight: 7.00 Price: $55.00 Quantity in Basket: none
It's time for plowing....Is your H1 plow ready for the upcoming spring and summer months? Been searching high and low for the beam bumper to mount the plow to the drawbar? Don't despair! We can help! This great new product replaces part number 26001A -BEAM BUMPER - and fits the H1 moldboard plow manufactured from 1940-1949. Need other parts for your H1 plow? We can help! Just give us a call!
	Drawbar - It's nice and new and for your H! Code: H410 Weight: 15.00 Price: $75.00 Quantity in Basket: none
Is your drawbar ugly? If your existing drawbar is ugly, wore out or missing, don't despair! Available now, this brand new drawbar fits your John Deere "H". Replaces part number H1030R and will be shipped to you in bare steel, ready for you to paint and install. Don't let an ugly drawbar ruin your restoration efforts, we can help!
	3-point hitch for your tractor! Code: 50120 Weight: 135.00 Price: $450.00 Quantity in Basket: none
Finally, an affordable 3-point hitch for your tractor! This hitch comes complete as shown with lower draft links, adjusters, upper rockshaft arms and chains and all mounting brackets. This hitch is a real work horse and will make your antique tractor more useable. This hitch easily ships UPS and is easy to install as well! Fits the following tractors: John Deere A, B, G, 50, 60 and 70. This great hitch is manufactured right here in the Ozarks!
	Drawbar Lock Pin and Lock Pin Handle Code: M133 Weight: 2.00 Price: $35.00 Quantity in Basket: none
Another great new restoration part, just for you! Featured is a lock pin and lock pin handle. This part holds the drawbar in place and replaces part numbers M485T and M486T. This part fits your John Deere "M" only.
	Sway Connector Code: 420133 Weight: 0.50 Price: $40.00 Quantity in Basket: none
Available now! This brand new sway connector is a component of your 3-point hitch. This is a commonly broken piece so we're pleased to provide it you know. It replaces part number M1701T. Two (2) required per tractor. Fits the following tractors: John Deere 40-H, 40-S, 40-T, 40U, 40-V, 40-W, 320, 330, 420, 430, 435 and 440.
	Clevis Plate Extension - NEW PRODUCT Code: M701 Weight: 10.00 Price: $30.00 Quantity in Basket: none
Featured is a great new product at a great price as well! You are viewing the M634T, Clevis Plate Extension for the drawbar assembly on your John Deere M and MT. Stay tuned as we had more new product for your tractor!
	Drawbar for your "B" and "50" -BACK IN STOCK!!! Code: B807 Weight: 45.00 Price: $99.00 Quantity in Basket: none
Available now! Featured is a brand new drawbar for your John Deere "B" (186,134 and up) and John Deere "50". Replaces part numbers B3262R and B2450R. Don't let a wore out drawbar ruin your restoration efforts. Simply replace it with our new drawbar!
	Brand New Clevis Hitch Plate for your John Deere M and MT -BACK IN STOCK!!! Code: M702 Weight: 18.00 Price: $99.00 Quantity in Basket: none
Available now! Featured is a brand new clevis hitch plate for your John Deere "M" and "MT". Comes complete as shown and is ready for you to paint and install. Replaces part number AM404T.
	Brand new drawbar for your John Deere "70" - NEW PRODUCT! Code: 70301 Weight: 40.00 Price: $125.00 Quantity in Basket: none
If the drawbar on your "70" is broken, bent or wore out, don't despair! Featured is a brand new drawbar for your John Deere 70. This drawbar will be shipped to you as bare steel, ready for your to paint to match your tractor. It replaces part numbers F1293R, R21331R and F1344R. So many times, during the restoration of a tractor, the drawbar doesn't get the attention it deserves. You've worked hard on the rest of your tractor, don't forget the drawbar!
	3-point hitch lift link body for your 520-730 - BRAND NEW PRODUCT! Code: 620302 Weight: 6.00 Price: $99.00 Quantity in Basket: none
What a great new product! Featured is a nice reproduction of part number F2670R. It fits your John Deere 520, 530, 620, 630, 720 and 730. It is the lift link body for your 3-point hitch. Two (2) required per tractor.
	3-point Leveling Crank Handle for your 330, 40, 420 and 430 - NEW ARRIVAL! Code: 420163 Weight: 1.00 Price: $35.00 Quantity in Basket: none
Featured is a great new product you've just gotta love! You are viewing a brand new 3-point leveling crank handle for your John Deere 320, 330, 40, 420 and 430. It replaces part number M2438T.
	Plow Bracket with Chain and Clevis - BACK IN STOCK!!! Code: H907 Weight: 2.00 Price: $35.00 Quantity in Basket: none
This is a great new product! Featured is a brand spankin' new Plow Bracket with Chain and Clevis for your H-1 plow. Comes complete as shown and is ready for your paint and finish. It replaces part numbers DA3426A, D2469A, DA3426A, 13397AN and 24697A. This particular bracket mounts to the plow beam and pins to the hydraulic lift bracket (see our part number H401). Available now and ready to ship!
	Mast head for your John Deere 50, 60 and 70 hitch - SORRY, OUT OF STOCK - BE BACK SOON!! Code: 50808 Weight: 20.00 Price: $99.00 Quantity in Basket: none
Featured is a beautiful new product! You are viewing a brand new mast head for the three point hitch on your John Deere 50, 60 and 70. It is a reproduction of the original part number P819A and fits your 800, 800A and 801 hitch. This particular masthead will allow you to use the following original equipment with your tractor, it's a must have! 400, 400A, 500 and 500A Tool bar, 860 and 870 Bedder, 9 Tool carrier, 80 Listed Crop Cultivator, 200 and 400 Row crop Cultivator, 11 and 11P Ditcher, C, K, KHZ, 416 and 416X Disk Harrows, Spike Harrow, Rotary Hoe, 22 Pan Breaker, 6, 7 and Lift type Planter, 800 and 805 Plow Disk, 200, 300 and 810 Moldboard plows, 200-850 Bedders
	Sway Chain Clevis for your 50, 60 and 70 - NEW ARRIVAL! Code: 50811 Weight: 2.00 Price: $25.00 Quantity in Basket: none
Featured is the large clevis, complete with pin, for your John Deere "50", "60" and "70" with the 800, 800A and 801 hitch. It replaces part numbers 31606A, DA2632A and 14779A. Part will be shipped to you as shown and will require additional painting to match your tractor.
	Integral Hitch Rod for your 801 hitch - NEW PRODUCT! Code: 50309 Weight: 5.00 Price: $47.50 Quantity in Basket: none
Featured is a wonderful new restoration part! You are viewing a brand new Integral Hitch Rod for your 801 Hitch. It replaces part number 32570A and is ready for your paint and installation. This particular piece is commonly missing on your hitch and helps keep whatever piece of equipment you have attached to your tractor stable and level. Fits the following tractors: John Deere 50, 60 and 70 using an original John Deere 801 hitch Stay tuned to our web site, we'll be launching a complete 800, 800A and 801 hitch soon! All made right here in America and affordably priced too!
	Sway Chain Anchor Bolt for your 40, 420, 430, 320, 330, 435 and 440! - NEW PRODUCT! Code: 420138 Weight: 1.00 Price: $9.95 Quantity in Basket: none
Everybody needs one or two of these! Featured is a brand new sway chain anchor bolt. This bolt attaches the chain anchor to the draft link and yoke on your 3-point hitch. Replaces part number M2084T, two (2) required per tractor. Fits the following applications: John Deere 40, 420, 430, 320, 330, 435 and 440
	Drawbar clamp for your "H" - NEW ARRIVAL! Code: H606 Weight: 1.00 Price: $9.95 Quantity in Basket: none
This is a great new product! Featured is a brand new drawbar clamp for your John Deere "H". It replaces part number H1050R. This is an important restoration item. This part keeps the drawbar locked in place. Without it, your drawbar can slide from side to side. Fits the following application: John Deere "H" (All)
	Brand New Loop Drawbar for your "A" and "B" - NEW PRODUCT! Code: B213 Weight: 30.00 Price: $79.00 Quantity in Basket: none
Featured is another one of those hard-to-find original parts. Luckily, we've reproduced them so you can have a brand new one at a more affordable cost than an original. You are viewing a brand new loop drawbar for your John Deere "A" and "B". It replaces part number A506R and will be shipped to you ready for your paint and installation. Fits the following applications: John Deere "B" (1,000-42,199) John Deere "A" (410,000-459,999)
	Evener Bar for your "50", "60" and "70" - NEW PRODUCT! Code: 50110 Weight: 8.00 Price: $68.50 Quantity in Basket: none
Featured is a brand new 3-point hitch evener bar for your 800, 800A and 801 hitch. Some folks may call this part a top link or center link. This bar is brand new and replaces part number 31583A. Fits the following applications: John Deere "50" John Deere "60" John Deere "70"
	Brand New Drawbar Support Spacer - NEW PRODUCT! Code: A751 Weight: 1.00 Price: $7.50 Quantity in Basket: none
Don't let the restoration of your drawbar ruin your day, we'll have the parts you need to do the job right the first time! Featured is a brand new Drawbar Support Spacer. It replaces part number D349R. After 50+ years of use, this part is typically worn out or gone. Fits the following applications: John Deere "A" (410,000-561,902) John Deere "AR/AO" (250,000-271,999) John Deere "B" (1,000-186,133) John Deere "BR/BO" (325,000 and up)
	Twisted Clevis with Pin - NEW PRODUCT! Code: D752 Weight: 4.00 Price: $14.99 Quantity in Basket: none
If tying down your tractor to the trailer has become a chore, don't worry, we can help. We haven't seen a 2-cylinder tractor yet that this clevis won't fit. We've carried these Twisted Clevis in the showroom for years but they had never made their way into the Online Store, until now. This clevis comes complete with pin and with a coat of green paint, it sure would look great! The pin in this clevis has a useable length of 3 1/4" x 3/4". This means it will fit just about any application you may have. Order several of this clevis. If you are like us, your friends will "borrow" it and it will never be seen again. They are that good!
	Brand New Rear Pivot Bushing for your "M" and "MT" - NEW ARRIVAL! Code: M217 Weight: 0.50 Price: $7.50 Quantity in Basket: none
Featured is a brand new drawbar rear pivot bushing. It replaces part number M479T. Simply install it and go! Fits the following application: John Deere "MT" (All) John Deere "M" (All
	Top Link Pin with Handle - NEW ARRIVAL! Code: 520737 Weight: 1.00 Price: $10.95 Quantity in Basket: none
Featured is a brand new top link pin with handle. It replaces part number AF2799R. Fits the following applications: John Deere "520", "530", "620", "630", "720" and "730"
	Brand New Drawbar Pivot Pin for your John Deere G, 620, 630, 70, 720 and 730 - NEW ARRIVAL!!! Code: 70802 Weight: 1.00 Price: $19.95 Quantity in Basket: none
This is one of those products you probably need, but may not know it yet. Featured is a brand new Drawbar Pivot Pin. It is also called a Drawbar Pin with Handle. It sits in your drawbar and is what keeps the drawbar from sliding front to back. I've seen pieces of rebar, wood and cut-off bolts in place of these pivot pins. Is that really what you want holding your drawbar in place? Our new pin is designed just like the original to lift in or out easily to remove your drawbar. It is of course, MADE IN THE GOOD OL' USA!!! Part will be shipped to you as bare steel, ready for your paint and installation. It replaces part numbers AF3759R, F856R and AF1318R. Fits the following applications: John Deere "G" and "GM" (18,700 and up) John Deere "620" (6213100 and up) John Deere "630" (All) John Deere "70" (All) John Deere "720" (All) John Deere "730" (All) Stay tuned as we add more Pivot Pins for your other tractors!!!
	Load Link Trunion Bolt Kit for your John Deere 420, 430 and 440 - NEW ARRIVAL!! Code: 420999 Weight: 4.00 Price: $45.00 Quantity in Basket: none
We love this new product! Featured is a brand new kit that every John Deere 420, 430 and 440 will need during it's restoration. This kit includes everything shown, all new and ready to install. It replaces part numbers M3140T and 14H534A and 24H1392A and M1993T and M3217T and 11H237A. This load link trunion bolt kit connects your 3-point draft link arm to the drawbar assembly. Two (2) kits are required per tractor but are sold individually. Order only what you need. We've seen these bolts welded to the drawbar, made out of homemade bolts and all sorts of homemade farmer fixes. Do the job right the first time and simply purchase our kit! Fits the following applications: John Deere 420-W John Deere 430-W John Deere 440-I John Deere 420-I John Deere 430-I
	Drawbar Pivot Pin and 3-Point Hitch Draft Link Pin for your John Deere A, B and more - NEW ARRIVAL! Code: B570 Weight: 1.00 Price: $19.95 Quantity in Basket: none
This is one of those products you probably need, but may not know it yet. Featured is a brand new Drawbar Pivot Pin. It is also called a Drawbar Pin with Handle. It sits in your drawbar and is what keeps the drawbar from sliding front to back. I've seen pieces of rebar, wood and cut-off bolts in place of these pivot pins. Is that really what you want holding your drawbar in place? Our new pin is designed just like the original to lift in or out easily to remove your drawbar. This same pin is used in your John Deere 800, 800A and 801 hitch. In your hitch, it allows you to slide the draft link in and out. It is of course, MADE IN THE GOOD OL' USA!!! Part will be shipped to you as bare steel, ready for your paint and installation. It replaces part numbers AA5365R and B2198R. Fits the following applications: PLEASE CHECK YOUR APPLICATION CAREFULLY, THIS GREAT NEW PART FITS ALOT OF TRACTORS!!! John Deere A (561,903 and up) John Deere B (186,134 and up) John Deere 50 (All) John Deere 520 (All) John Deere 530 (All) John Deere 60 (All) John Deere 60 (Standard -6043000 and up) John Deere 620 (620000-6213099) John Deere 50 (HITCH ONLY) John Deere 60 (HITCH ONLY) John Deere 70 (HITCH ONLY) John Deere 420-S John Deere 430-S John Deere 420-T John Deere 430-T John Deere 420-Vegetable John Deere 430-Vegetable John Deere 40 (Standard, Vegetable and Tricycle) John Deere 320-S John Deere 330-S John Deere M and MT (Only with optional swinging drawbar attachment)
	Load Link Trunion Bolt for your John Deere 420, 430 and 440 - NEW ARRIVAL!! Code: 420998 Weight: 4.00 Price: $35.00 Quantity in Basket: none
We love this new product! Featured is a brand new Trunion Bolt that every John Deere 420, 430 and 440 will need during it's restoration. It replaces part number M3140T. This load link trunion bolt connects your 3-point draft link arm to the drawbar assembly. Two (2) bolts are required per tractor but are sold individually. Order only what you need. We've seen these bolts welded to the drawbar, made out of homemade bolts and all sorts of homemade farmer fixes. Do the job right the first time and simply purchase our new bolt! Fits the following applications: John Deere 420-W John Deere 430-W John Deere 440-I John Deere 420-I John Deere 430-I
	Upper Lift Link Yoke for your John Deere 620, 630 and more - NEW ARRIVAL!!! Code: 720137 Weight: 7.00 Price: $47.99 Quantity in Basket: none
Featured is a brand new 3-point upper yoke lift link for your tractor. This part connects the draft link adjuster to the upper rock shaft arm. It replaces part number AF2704R. It does not include the pivot. Two (2) are required per tractor but sold individually. Fits the following applications: John Deere 620 John Deere 630 John Deere 720 John Deere 730 John Deere 520 John Deere 530
	Brand New Sway Chain for your John Deere 40, 420 and 430 - NEW ARRIVAL!!! Code: 40732 Weight: 3.00 Price: $12.95 Quantity in Basket: none
We love making your restoration efforts easier and this great new product is no exception! Featured is a brand new sway chain for your tractor. This sway chain connects the draft link to the drawbar assembly. This chain keeps the draft link arm from swaying or moving. This chain replaces part number AM2779T and will be shipped to you as bare steel. It has no finish at all. This will make it much easier for you to paint and install. Chain is sold individually, per side. LH and RH are the same. Two (2) are required per tractor but sold individually. Fits the following applications only: John Deere 40 (W only) John Deere 420 (I and W only) John Deere 430 (I and W only) Do you need sway chains for another tractor? We have it! Just give us a call or drop us an e-mail and we'll add it to the Online Store just for you!
	Brand New Three Point Return Spring for your John Deere 40, 420 and 430 - NEW ARRIVAL!!! Code: 40191 Weight: 5.00 Price: $49.95 Quantity in Basket: none
Available now! Featured is a brand new Three Point Return Spring. It replaces part number M2118T. Part will be shipped to you as shown, ready for your paint and installation. MADE IN THE USA!!! Fits the following applications only: John Deere 40-S (60,000-69,581) John Deere 40-H John Deere 40-T John Deere 40-V John Deere 40-W John Deere 420-T John Deere 420-V John Deere 420-H John Deere 430-T John Deere 430-V John Deere 430-H Stay tuned as we add great new products for your tractor!
	Brand New 3-Point Crank Lock for your John Deere 40, 420, 430, 320 and 330 - NEW ARRIVAL!!! Code: 420336 Weight: 2.00 Price: $35.00 Quantity in Basket: none
Available now! Featured is a brand new Three-Point Crank lock for your tractor. This part locks the 3-point adjuster handle in place. Part has been MADE IN THE USA and will be shipped to you as bare steel, ready for your paint and installation. It replaces part number M2492T. Fits the following applications: John Deere 40-U John Deere 420-U John Deere 430-U John Deere 320-U John Deere 330-U
	Center Link Adjusting Lever w/ Drive Screws for your John Deere 520, 530, 620, 630, 720 and 730! Code: 720316 Weight: 3.00 Price: $14.95 Quantity in Basket: none
Available now! Featured is a brand new Center Link Adjusting Lever with Drive Screws. It replaces part numbers F2828R and 37H44 and D454R. This brand new part will be shipped to you as shown, bare steel, ready for your paint and installation. All machine work has been completed and we've installed one (1) of the drive screws for you. You'll install the second drive screw after installation. Both drive screws are included at no charge. This Center Link Adjusting Lever installs in the center of your Third Link or Center Link to adjust the length. These are easily lost so we've made a brand new one, just for you! Fits the following applications: John Deere 520 John Deere 530 John Deere 620 John Deere 630 John Deere 720 John Deere 730
	Brand New Drawbar Pivot Pin for your John Deere H - IN STOCK!!! Code: H696 Weight: 0.50 Price: $7.50 Quantity in Basket: none
Available now! Featured is a brand new Drawbar Pivot Pin for your John Deere H. It replaces part number H105R and will be shipped to you as shown, bare steel, ready for your paint and installation. MADE IN THE USA!!! This pin sits in the drawbar support bracket and keeps your drawbar in place. This pin usually exhibits some pretty nasty wear after 50 years or so of use or may be completely gone. No worries, just replace it with our new one! Fits the following application: John Deere H (All)
	New Lift Link Yoke with Pins for your John Deere M - HOT NEW ITEM!!! Code: M1356 Weight: 1.00 Price: $24.99 Quantity in Basket: none
Available now! This is a super restoration part and at a great price too! Don't let a missing lift arm yoke ruin your restoration efforts! This lift arm yoke assembly comes complete as shown and replaces part numbers AM423T, 25H52A and AM1331T. The lift arm yoke connects the lift arm and lift link chain. You'll need two per tractor. Sold individually, order only what you need. MADE IN THE USA!!! Part will be shipped to you in black primer, ready for your paint and installation. Fits the following application: John Deere M (All)