Carburetor Kits and more...

	Fuel line with fittings - NEW PRODUCT! Code: 40171 Weight: 1.00 Price: $25.00 Quantity in Basket: none
Available now! Featured is a brand new fuel line, complete with fittings for your John Deere 40, 320, 330, 420 and 430. Replaces part number AM1817T.
	Carburetor gasket set Code: 420121 Weight: 0.10 Price: $3.99 Quantity in Basket: none
Just need a few gaskets for your carburetor but not an entire overhaul kit? This gasket set may do the trick! Set includes carburetor mounting gaskets, bowl gasket, float needle seat gasket and load needle assembly gasket. Fits John Deere M, MT, 40, 420, 430, 320 and 330.
	Carburetor Kit for your John Deere "420" and "430" - NEW PRODUCT! Code: 420751 Weight: 1.00 Price: $24.95 Quantity in Basket: none
Is the carburetor on your "420" or "430" giving you trouble? Is it time for a rebuild? Featured is a complete carburetor kit for your Marvel Schebler TSX 641 and TSX 678 carburetors. Comes complete as shown with rebuild and repair instructions.
	Carburetor float for your 2-barrel carb! Code: 50113 Weight: 0.25 Price: $25.00 Quantity in Basket: none
Time for an overhaul of the carburetor on your John Deere 50-730? Don't forget to replace the float! This brand new float replaces part number AR10069.
	Throttle Rod - New item! Code: 50121 Weight: 0.40 Price: $12.50 Quantity in Basket: none
Featured is a new throttle rod for your tractor. This rod runs from the governor to the carburetor. Replaces part number B2544R. Fits your John Deere "B" (201,000 and up) and your John Deere 50.
	Brand new fuel line for your John Deere "50" - NEW PRODUCT! Code: 50124 Weight: 1.00 Price: $25.00 Quantity in Basket: none
Featured is a brand new fuel line for your John Deere "50". It replaces part number AB4640R and comes complete as shown, ready for your paint and installation. Fits the following application: John Deere "50" (5000000-5016132) Manual shut-off only!!! This will not fit your later "50" tractor with an automatic sediment bowl. Please see our part number 50809 for that particular fuel line.
	Brand New Fuel Line for your "50", "520" and "530" - NEW ARRIVAL! Code: 50809 Weight: 1.00 Price: $25.00 Quantity in Basket: none
Featured is a brand new fuel line for your John Deere "50" (5016133 and up), 520 and 530, all using an Automatic Sediment Bowl. It replaces part numbers AB4747R and comes complete as shown, ready for your paint and installation! Fits the following applications: John Deere "50" (5016133 and up) John Deere "520" (all) John Deere "530" (all)
	LP Fuel Filler Cap with Stud and Cotter Pin - SORRY - NO LONGER AVAILABLE!!! NOT ENOUGH DEMAND!!! Code: 520131 Weight: 1.00 Price: $25.00 Quantity in Basket: none
Available now! This hard to find part is available now, just for you! Featured is the LP fuel filler cap with stud and cotter pin. This cap keeps the cover to your LP tank in place. It's a wonderful restoration part and important safety item as well. Replaces part numbers AA6008R and AR20568R. Fits your John Deere 50, 60, 70, 620, 630, 720, 730, 520 and 530.
	Fuel Gauge and Sending Unit for your John Deere 520, 530 and more - It's Beautiful!BACK IN STOCK!!! Code: 520163 Weight: 3.00 Price: $149.00 Quantity in Basket: none
Now available! Featured is a wonderul new kit bound to make your life much better! You are viewing a brand new fuel gauge, complete with sending unit for your 520, 530, 620, 630, 720 and 730. No more worries about that busted up, non-working fuel gauge and sending unit in your tractor. Simply install our new kit and you're ready to go! Replaces part numbers AB5138R, AR20931R, AB5139R, AF2721R, AA6566R, AR20897R, AR20712R and AF2720R. This particular kit is 12V - negative ground but we're working on the 6V version for your 80, 820 and 830! (Please see our part number 820188) Did you know it is easy to switch your tractor from positive to negative ground? The tractor doesn't care which way it runs and it doesn't affect it's performance. Simply change the battery cables around, switch the wires on your amp gauge, switch the wires on your coil and if necessary, repolarize your generator. Technically, your tractor should be repolarized every time you remove or replace the battery in your tractor. Need polarizing instructions? It's easy too. Simply momentarily touch any hot wire to the armature post on the generator. It's that easy! Running an alternator? You are already negative ground. Any questions? Just give us a call!
	Brand New Fuel Line just for your "620" - NEW PRODUCT! Code: 620197 Weight: 1.00 Price: $25.00 Quantity in Basket: none
Has the fuel line on your "620" been replaced long ago with a chunk of rubber hose and some fittings? Replace it with our brand new fuel line! Featured is a reproduction of part number AA6493R and is for your "620" only. It runs from the sediment bowl to the carburetor.
	Brand New Fuel Filler Neck Grommet - NEW PRODUCT! Code: 620605 Weight: 1.00 Price: $14.39 Quantity in Basket: none
This sure is a great restoration part. Featured is a brand new fuel filler neck grommet for your tractor. It replaces part numbers R39613 and A5157R and fits the following applications: John Deere 70, 620, 630, 720 and 730 (gas only) John Deere 60 (6035350 and up) John Deere 60 (6043000 and up - STANDARD TRACTORS ONLY) John Deere 70, 720 and 730 (diesel only)
	Brand new fuel line for your "630" -NEW PRODUCT! Code: 630178 Weight: 1.00 Price: $25.00 Quantity in Basket: none
Featured is a brand new fuel line for your John Deere "630". It replaces part number AR20651R, comes complete as shown and will be shipped to you ready for your paint and installation. Fits the following application: John Deere "630" (General Purpose and Standard - all)
	Fuel line for your John Deere "70" - NEW ARRIVAL! Code: 70124 Weight: 1.00 Price: $25.00 Quantity in Basket: none
Featured is a brand new fuel line for your John Deere "70". It replaces part number AF1723R, comes complete and shown and will be shipped to you ready for your paint and installation. Fits the following application: John Deere "70" (7006493 and up using Automatic Sediment bowl only)
	Brand new fuel line for your early "70" - NEW ARRIVAL! Code: 70213 Weight: 0.00 Price: $25.00 Quantity in Basket: none
Featured is a brand new fuel line for your John Deere "70". It replaces part number AF1489R, comes complete as shown and is ready for your paint and installation. Fits the following application: John Deere "70" (7000000 - 7006493) Manual sediment bowl only!!
	Brand New Fuel Line for your "720" and "730" Code: 720967 Weight: 2.00 Price: $25.00 Quantity in Basket: none
Been searching high and low for a fuel line for your tractor? Well look no more, we've got it! We're proud to be reproducing fuel lines for nearly all of the 2-cylinder tractors. Don't see your application listed? Just give us a call or drop us an e-mail and we'll add it to the Online Store for you in a jiffy. Featured is a brand new fuel line and it replaces part number AF3618R. Fits the following applications: John Deere "720" (7209610 and up with an automatic sediment bowl - gas, of course) John Deere "730 (All - gas as well) Comes complete as shown, complete with fittings, ready for your paint and installation!
	Brand New Fuel Line for your "A" - NEW PRODUCT! Code: A1012 Weight: 1.00 Price: $25.00 Quantity in Basket: none
Featured is another great new fuel line! You are viewing a brand new fuel line, complete with fittings for your "A". It replaces part numbers AA4032R and AA3544R. Please check your application carefully as it fits the following tractors: John Deere "A" (655,572-662,728) - Fits only those tractors with auxiliary tank - runs from tank to 3-way valve and John Deere "A" (478,500 and up) - All Fuel - Runs from the starter tank to the 3-way valve.
	Carburetor Float - new Code: A102 Weight: 0.50 Price: $24.95 Quantity in Basket: none
Brand new carburetor float for your John Deere tractor. Why mess with that used float any longer? Don't forget to replace the float when you rebuild your carburetor - cheaper to do the job right the first time. This float fits your John Deere A, B, D and G.
	Fuel line for your late "A" - NEW ARRIVAL! Code: A124 Weight: 1.00 Price: $25.00 Quantity in Basket: none
Featured is a brand new fuel line for your John Deere "A". It replaces part number AA4829R and comes complete as shown, ready for your paint and installation. Fits the following application: John Deere "A" (662,729 and up)Gas only
	Fuel Line for your "A" and "60" - NEW PRODUCT! Code: A198 Weight: 1.00 Price: $25.00 Quantity in Basket: none
Featured is a lovely new fuel line for your "A". It replaces part numbers AA5067R and AA2349R and runs from the 3-way valve to the carburetor. Fits the following applications: John Deere "A" - 477,000 and up (all fuel) John Deere "A" - 477,000-622,820 (Gas tractors only) John Deere "A" - 655,572-662,728 (Gas tractors only) John Deere "60" - 600001 - 6013899 (Early all-fuel tractors only) Don't see your particular fuel line? Just drop us an e-mail or a phone call, we're now reproducing all the 2-cylinder fuel lines!
	Brand New Fuel Control Rod for your "A" and "G"- NEW PRODUCT! Code: A277 Weight: 1.00 Price: $19.95 Quantity in Basket: none
Featured is a brand new fuel control rod for your "A" and "G". It replaces part number A2291R. This rod runs from the dash to your 3-way valve. Although it is hard to see, the original part number is stamped into the handle, just like the original. Fits the following application: John Deere "A" (497,590 - 583,999) - Electric Start Only John Deere "AR/AO" (143,800 - 161,399) - Electric Start Only John Deere "G" (13,000 and up)
	Brand New Throttle Rod for your "A" - NEW PRODUCT! Code: A280 Weight: 1.00 Price: $12.50 Quantity in Basket: none
Featured is a brand new throttle rod for your "A". It replaces part number A1184R and runs from the governor arm to the carburetor. Comes complete as shown with threaded end and holes on opposite end. Fits the following application: John Deere "A" (424,025-583,999)
	Fuel Line for your Unstyled "A" - NEW PRODUCT! Code: A306 Weight: 1.00 Price: $25.00 Quantity in Basket: none
Featured is a brand new fuel line, ready to paint and install for your John Deere "A" (Serial number 410,000-410,858). Okay, so it doesn't fit many tractors but it's a good one if you need it! Replaces part number AA266R and is of course, MADE IN THE USA!
	Brand New Gas Line for your Unstyled "A" - NEW PRODUCT! Code: A377 Weight: 3.00 Price: $25.00 Quantity in Basket: none
Another new fuel line! Featured is a brand new fuel line for your Unstyled "A". It replaces part number AA1887R and runs from the starter tank to the 3-way valve. Comes complete as shown, ready for your paint and installation. Fits the following application: John Deere "A" (410,859-476,999)
	Brand New Throttle Rod for your "A" - NEW PRODUCT! Code: A619 Weight: 1.00 Price: $12.50 Quantity in Basket: none
Featured is a brand new throttle rod for your John Deere "A". This rod replaces part number A3355R and runs from the governor arm down to the carburetor. Comes complete as shown with threaded end and holes on the opposite end. Fits the following application: John Deere "A" (584,000 and up)
	Front Gas Tank Bracket - NEW PRODUCT! Code: A701 Weight: 2.00 Price: $25.00 Quantity in Basket: none
Available now! Featured is a brand new front gas tank bracket for your unstyled "A" (410,000-476,999). Pair this new bracket up with our fuel tank webbing kit (see our part number B709) and you have a winning combination! Replaces part number AA271R.
	Carburetor Rebuild Kit for your John Deere G, GM, GP and A - NEW ARRIVAL! Code: A754 Weight: 0.50 Price: $19.95 Quantity in Basket: none
Is it time to rebuild the carburetor in your tractor? Featured is a dandy rebuild kit for your Marvel Schebler carburetor. Specifically DLTX 15, 17, 18, 19, 24, 33, 41 and 51. Comes complete as shown and even includes instructions on how to do the job right!
	Brand new fuel line for your Unstyled "A" - NEW PRODUCT! Code: A901 Weight: 1.00 Price: $25.00 Quantity in Basket: none
Featured is a brand new fuel line for your Unstyled "A". It comes complete as shown and is ready for your paint and installation and replaces part number AA1888R. This particular fuel line runs from the 3-way valve to the carburetor and fits the following tractors: John Deere "A" (410,859-476,999)
	Brand New Fuel Line for your "A" - NEW ARRIVAL! Code: A902 Weight: 1.00 Price: $25.00 Quantity in Basket: none
Featured is a brand new fuel line, complete with fittings, for your John Deere "A". This particular fuel line runs from the sediment bowl to the carburetor and replaces part number AA4299R. This particular fuel line fits the following tractors: John Deere "A" (622,821-655,571)
	Carburetor Rebuild Kit for DLTX34 Carb Code: B124 Weight: 1.00 Price: $19.95 Quantity in Basket: none
Great carburetor rebuild kit for your DLTX34 carburetor. Includes everything shown in photo. Do the job right the first time, get the kit that includes it all! Need the float? We've got it!
	Fuel Indexing Stop - It's brand new! Code: B151 Weight: 0.25 Price: $17.00 Quantity in Basket: none
Available now as a brand new part! Featured is the fuel indexing stop for your tractor. This part works with the fuel control rod on your tractor to switch your tractor from gas to fuel or off. An important restoration part we're pleased to bring it to you. This part has been obsolete for many years and we've exhausted our supply of used ones so now you can have a nice new one for your tractor. Replaces part number B1901R. Fits the following tractors: John Deere B (94,494 and up) BR/BO (332,100 and up) AR/AO (260,000 and up) Styled AR/AO (all) A (497,590 and up) D (148,872 and up) G (13,000 and up) 60, 620 and 630 (all-fuel of course)
	Unstyled B and BR/BO Fuel line - NEW PRODUCT! Code: B171 Weight: 1.00 Price: $25.00 Quantity in Basket: none
Featured is a brand new fuel line for your unstyled "B". Replaces part number AB1773R. Comes complete as shown and is ready for your paint and installation. Fits the following applications: Unstyled "B" (11,622-59,999) "BR/BO" (325,000 and up)
	Another new fuel line for your Unstyled B, BR and BO - NEW PRODUCT! Code: B172 Weight: 1.00 Price: $25.00 Quantity in Basket: none
Featured is a brand new fuel line, complete with soldered fittings. Replaces part number AB1774R. This particular fuel line runs from the 3-way valve to the carburetor. Fits the following applications John Deere "B" (11,622-59,999) John Deere "BR/BO" (325,000 and up)
	Carburetor Gasket Kit Code: B174 Weight: 0.15 Price: $3.99 Quantity in Basket: none
Carburetor gasket kit for your John Deere tractor A, B, G and D, comes complete as shown. Need the complete carburetor kit? We've got those too!
	Carburetor choke shaft Code: B197 Weight: 0.50 Price: $26.87 Quantity in Basket: none
Need a brand new Carburetor choke shaft for your John Deere B, A and G? We have a brand new one on the shelf fo you! Replaces part number AR10043R.
	"Hard to find" Fuel Indexing Stop - NEW PRODUCT! Code: B210 Weight: 1.00 Price: $17.00 Quantity in Basket: none
We love this new product! You've asked us for years for the fuel indexing stop for the 1939 and 1940 tractors using the unique 3-way valve. Here you go! Featured is a brand new fuel indexing stop, it replaces part number B1535R. Fits only the following applications: John Deere "B" (60,000-94,493) John Deere "A" (477,000-497,589) John Deere "D" (143,800-148,871) John Deere "BR/BO" (325,000-332,099) John Deere "AR/AO" (250,000-259,999)
	Fuel Selector Rod for your hand start "B" and "A"- AVAILABLE NOW! Code: B214 Weight: 2.00 Price: $19.95 Quantity in Basket: none
Featured is a brand new fuel selector rod for your hand start John Deere "B" and John Deere "A". This new part replaces part number B1900R. Although it's hard to see in the photo, the original part number is stamped into the handle, just like the original. Part will be shipped to you as bare steel, ready for your paint and finish. This part runs through your dash to the fuel indexing stop. Need that as well? Be sure and check out our part number B151. Fits the following applications: John Deere "B" (94,494-200,999)HAND START ONLY John Deere "A" (497,590 and up) HAND START ONLY
	Brand New Fuel Selector Rod for your B - NEW PRODUCT! Code: B218 Weight: 2.00 Price: $19.95 Quantity in Basket: none
Featured is a brand new fuel selector rod for your John Deere "B". It replaces part number B1939R and although it's hard to see in the photo, the original part number is stamped into the handle, just like the original. Ready for your paint and finish, this part will be shipped to you as bare steel. Fits the following application: John Deere "B" (96,000-200,999) - ELECTRIC START ONLY
	3-way valve packing for your favorite tractor! - BACK IN STOCK!!! Code: B222 Weight: 0.05 Price: $4.99 Quantity in Basket: none
New, original style packing for your 3-way fuel valve selector. Got a leaky 3-way valve? Rebuild it with our new packing and stop that leak the right way!
	Control rod end D157R - BACK IN STOCK!!! Code: B324 Weight: 0.10 Price: $9.95 Quantity in Basket: none
Now available! This part is used in conjuction with the throttle control and fuel control rods. A commonly rusted up or damaged original part, this nice new reproduction part will make your restoration efforts much easier! Replaces part number D157R, fits your John Deere A, B, D, G, H and R.
	Hand start choke lever - great new item! Code: B325 Weight: 0.35 Price: $39.95 Quantity in Basket: none
This new product is a hand start choke lever for your John Deere tractor with a hand start carburetor. This lever replaces the generic, one size fits all electric start choke lever. Need one for your hand start H? Be sure and order our part number H406!
	Brand new fuel line for your "B" - NEW PRODUCT! Code: B407 Weight: 1.00 Price: $25.00 Quantity in Basket: none
Featured is a brand new fuel line for your John Deere "B" (60,000-200,999). It comes complete as shown, ready to paint and install, complete with gland nut and fittings. It runs from your starter tank down to the 3-way valve. It replaces part number AB1771R. Did you know we now reproduce fuel lines for all the John Deere 2-cylinder tractors? Don't see your particular application listed? It doesn't mean we don't have it, just haven't added it to the Online Store yet. Just give us a call and we'll add it to the store, just for you!
	Fuel Control Rod for your 1939 and 1940 "B" - NEW PRODUCT! Code: B408 Weight: 1.00 Price: $24.77 Quantity in Basket: none
Featured is a brand new fuel control rod for your John Deere "B" (60,000-94,493). It features a coupling end which is unique to these tractors. Replaces part number B1447R and although you can't see it in the photo, we've even stamped the part number in the end of the control rod, just like the original. Part will be shipped to you bare, ready for you to paint to match your tractor!
	Fuel Gland and nut - Make your own fuel lines! - NEW ARRIVAL! Code: B505 Weight: 0.10 Price: $5.99 Quantity in Basket: none
Another great new product! Featured is a brand new steel fuel gland with nut. If you prefer to build your own fuel lines, now we can help! You'll need two (2)kits per fuel line. This kit replaces part numbers A2069R and E2150R. This kit is used on the following tractors: John Deere A, B, D, G, H, 50, 520, 530, 60, 620, 630, 70, 720, 730, 80, 820 and 830
	Fuel line for your Electric Start Mid B - NEW ARRIVAL! Code: B506 Weight: 1.00 Price: $25.00 Quantity in Basket: none
Featured is a brand new fuel line for your electric start John Deere "B" (96,000-200,999). It replaces part number AB2929R and runs from the starter tank to the 3-way valve. Prefer to make your own fuel lines? Be sure and check out our part number B505!
	Brand new fuel line for your "B" - NEW PRODUCT! Code: B603 Weight: 1.00 Price: $25.00 Quantity in Basket: none
Featured is a brand new fuel line for your John Deere "B", replaces part number AB3571R. Fits the following applications: "B" (201,000 and up - All fuel) and "B" (201,000 - 238,795 - GAS) Comes complete as shown with fittings. Need a fuel line you don't see in our Online Store? Just give us a call or drop us an e-mail, we're producing fuel lines for the entire 2-cylinder series!
	Carburetor Choke Lever and Pin for your "A" and "B" - BACK IN STOCK!!! Code: B605 Weight: 0.25 Price: $25.00 Quantity in Basket: none
Featured is a brand new carburetor choke lever with pin for your "A" and "B". It replaces part number R10106 and fits the following applications: John Deere "A" (584,000 and up) John Deere "B" (201,000 and up)
	Brand new Fuel Line for your "B" - NEW ARRIVAL! Code: B705 Weight: 1.00 Price: $25.00 Quantity in Basket: none
Featured is a brand new fuel line for your "B" (238,796 and up). Replaces part number AB3888R and runs from the sediment bowl down to the carburetor. Comes complete as shown and will be ready for your paint and installation. Did you know we now reproduce fuel lines for all the 2-cylinder tractors? Don't see your particular fuel line? Just give us a call or drop us an e-mail and we'll add it to the Online Store in a jiffy! Fits the following tractor: John Deere "B" (238,796 and up)
	Gas Tank Webbing Kit for your A, B and G - NEW PRODUCT! CHECK OUT THIS LOW PRICE! Code: B709 Weight: 0.25 Price: $4.99 Quantity in Basket: none
Featured is a fuel tank webbing kit for your John Deere "A", "B" and "G". This kit comes complete as shown with rivets and will do both brackets. Be sure and check out our newest tank bracket (A701). It may be just the part you are looking for!
	Fuel line for your Mid "B" - NEW ARRIVAL! Code: B776 Weight: 1.00 Price: $25.00 Quantity in Basket: none
Another new fuel line just for you! Featured is a brand new fuel line, complete with fittings for your John Deere "B". It replaces part number AB2751R and comes complete as shown, ready for your paint and installation. Fits the following application: John Deere "B" (60,000-200,999) - Runs from 3-way valve to carb
	Choke Rod for your John Deere B - New Product! Code: B804 Weight: 15.00 Price: $17.50 Quantity in Basket: none
Featured is a brand new choke rod for your John Deere "B" (258,820 and up). Replaces part number B2819R. This rod runs from the pedestal to the carburetor. Don't forget, you'll also need our new choke knob to complete the package! This choke rod is an exact copy of the original, sorry it wouldn't all fit in the photo. It's just too long!
	Performance Spark plug - IT'S HOT!!! Code: D107 Weight: 0.25 Price: $3.99 Quantity in Basket: none
We love this spark plug! Notice the longer electrode on the bottom of the plug? This gives this particular spark plug better resistance against fouling out. If your 2-cylinder tractor is hard to start at times and easily fouls out plugs, switch to this plug because it provides a much longer life in the tractor. If your tractor fouls it out, simply give it a good cleaning and it's ready to go. It's designed for your 2-cylinder tractor and it's fuel system. This plug measures 7/8" and has an 18 thread count. It fits the following tractors: Unstyled "A", AR and AO, Unstyled B, BR and BO, GP, Unstyled D, Styled D and your 1939 A and your John Deere L (621,000-639999).
	Brand New Fuel line for your "D" - NEW PRODUCT! Code: D212 Weight: 1.00 Price: $25.00 Quantity in Basket: none
Featured is a brand new copper fuel line for your John Deere "D". It replaces part number AD1962R and runs from the 3-way valve to the carburetor. Fits the following application: John Deere "D" (Unstyled) (116,768 and up) John Deere "D" (143,800 and up - 1939 and up)
	Fuel line for your GP, Unstyled "D" and LH Main Oil Line too! - NEW ARRIVAL! Code: D608 Weight: 1.00 Price: $25.00 Quantity in Basket: none
Featured is a neat product that actually has three jobs. Firstly, it is the fuel line for your John Deere "D" (it runs from the starter tank to the 3-way valve) and replaces part number AD44R. This same fuel line also fits your "GP". On your "GP", it runs from the 3-way valve to the carburetor. This same line is also the LH main oil pipe on the unstyled "D" and the LH oil pipe on the "GP". Deere knew what they were doing and made this line serve several applications. So, whether you need it as a fuel line or as the LH main oil line, it's the same part! Fits the following applications: John Deere "D" (30,400-109,943)(Fuel and LH Main)(UNSTYLED ONLY) John Deere "GP" (223,803 and up)(Fuel line only) John Deere "GP" (200,111-223,802)(LH Main only)
	Fuel line for your "D" - NEW ARRIVAL! Code: D707 Weight: 1.00 Price: $32.50 Quantity in Basket: none
Available now! Featured is a brand new fuel line for your John Deere "D". It replaces part number AD1957R and runs from the starter tank to the 3-way valve. Fits the following application: John Deere "D" (143,800 and up)
	Fuel Control Coupling and Extension - NEW LOWER PRICE!!! Code: G151 Weight: 0.25 Price: $9.95 Quantity in Basket: none
Featured is a hard to find part and we're pleased to bring it to you now. You are viewing the fuel extension rod and control rod coupling for the fuel system on your John Deere "G". Used on tractors 13,000 and up. All new parts patterned from our original parts. Get the fuel system on your "G" back to it's original configuration with our new parts. Replaces part numbers F593R and A2230R.
	Fuel line for your Unstyled "G" - NEW PRODUCT!!! Code: G197 Weight: 1.00 Price: $25.00 Quantity in Basket: none
Featured is a great new product! You are viewing a brand new fuel line for your Unstyled "G". It replaces part number AF499R and runs from the starter tank to the 3-way valve. Comes complete as shown and is of course, brand new!
	Another brand new fuel line for your Unstyled "G"! - NEW PRODUCT! Code: G198 Weight: 1.00 Price: $25.00 Quantity in Basket: none
Featured is a great new product! You are viewing a brand new fuel line for your Unstyled "G". It replaces part number AF500R and runs from the 3-way valve to the carburetor. Comes complete as shown and is of course, brand new!
	Throttle rod for your "G" - NEW PRODUCT! Code: G200 Weight: 1.00 Price: $15.00 Quantity in Basket: none
Featured is a brand new throttle rod for your "G", it replaces part number F119R. Fits your styled and unstyled "G" and runs from the governor down to the carburetor.
	Fuel Line for your "G" - NEW PRODUCT! Code: G301 Weight: 1.00 Price: $25.00 Quantity in Basket: none
Featured is a brand new fuel line, complete with soldered gland nut and fittings for your John Deere "G" and "GM". This particular fuel line runs from the starter tank to the 3-way valve. It replaces part number AF624R and fits tractors serial number 13,000 and up. COMING SOON: Fuel lines for all the 2-cylinder tractors!
	Fuel line for your John Deere G and GM - NEW PRODUCT! Code: G304 Weight: 1.00 Price: $25.00 Quantity in Basket: none
Featured is a brand new fuel line with fittings for your John Deere "G" and "GM" (13,000 and up - styled tractors). Replaces part number AF625R, it runs from the 3-way valve to the carburetor. All new just for you! Did you know we know reproduce fuel lines for all the 2-cylinder tractors? Don't see the one you need? Just give us a call!
	Fuel Tank Webbing Kit - NEW PRODUCT AND NEW LOW PRICE! Code: H1017 Weight: 0.25 Price: $4.99 Quantity in Basket: none
Featured is a new product you'll just love! You are viewing a fuel tank webbing kit, complete with rivets, for the gas tank brackets on your John Deere "H". One kit does both brackets. Replaces part numbers D1520R, H476R and H477R. MADE IN THE USA!
	Carburetor Float for your John Deere H - BACK IN STOCK!!!! Code: H111 Weight: 0.50 Price: $35.00 Quantity in Basket: none
New carburetor float for your JD H. Fits DLTX26 and DLTX46 carburetors.
	Carburetor Rebuild Kit for DLTX26 or DLTX46 Code: H114 Weight: 1.00 Price: $19.95 Quantity in Basket: none
Rebuild kit for your H carburetor. Includes everything you need to do the job right! Don't forget to order a new float. We've got it available as well!
	Brand new gas cap with gasket - Buy Clean Fuel - AVAILABLE NOW! Code: H144 Weight: 0.50 Price: $9.95 Quantity in Basket: none
Replace that dented, rusty, leaky gas cap with our new original style gas cap, even includes a nice cork gasket.Has wording "Buy Clean Fuel" just like the original. Fits your John Deere A, B, D, G, H and L and early "50". Replaces part number AD709R.
	Fuel Selector Rod - NEW PRODUCT! Code: H166 Weight: 1.00 Price: $14.99 Quantity in Basket: none
Available now! Featured is a brand new fuel selector rod for your John Deere "H" (20,650 and up). Replaces part number H796R. This rod runs through your dash to the fuel coupler (see our part number H329).
	Carburetor Gasket Set Code: H224 Weight: 0.25 Price: $3.99 Quantity in Basket: none
Featured is a gasket set for your "H" carburetor, whether it is a DLTX 26 or DLTX 46. Great value at only $3.99!
	Fuel Line - Just for your H! Code: H265 Weight: 1.00 Price: $25.00 Quantity in Basket: none
New fuel line for your John Deere H, replaces part number AH647R. This fuel line runs from the sediment bowl to the carburetor.
	Fuel Control Rod Coupling Code: H329 Weight: 0.10 Price: $7.99 Quantity in Basket: none
Featured is a brand fuel control rod coupling for your John Deere "H" (20,650 and up). It replaces part number H797R. Part will be shipped to you as bare steel, ready for your paint and installation. Need the control rod also? No problem! Just check out our part number H166!
	Starter tank fuel line just for your "H"!!! Code: H404 Weight: 1.00 Price: $25.00 Quantity in Basket: none
Yippee! For years, this fuel line has been difficult for us to keep in stock because the supply of good used fuel lines has dwindled to nothing. Now, we have nice, new reproduction fuel lines for your H. This fuel line replaces part number AH644R and runs from the starter tank to the 3-way fuel valve. Nice, new fittings and new pipe ensure a leak free joint.
	Hand start choke lever for your "H" - IN STOCK!!! Code: H406 Weight: 0.35 Price: $39.95 Quantity in Basket: none
If your hand start "H" is missing the carburetor choke lever we can help! This new reproduction part replaces the generic, one-size fits all electric start choke lever. Need one for your hand start A, B or G? Simply order our part number B325!
	Throttle Rod - Nice and new! Code: H457 Weight: 1.00 Price: $15.00 Quantity in Basket: none
Featured is the throttle rod that runs from your governor to the carburetor. Replaces part number H283R and is brand new. Comes complete with cotter pins for easy installation. Fits your John Deere "H".
	Carburetor Float for your M, MT, MC, MI, 40, 420, 430, 320 and 330! - AVAILABLE NOW!!! Code: M102 Weight: 1.00 Price: $24.95 Quantity in Basket: none
Featured is a brand new carburetor float for your TSX carburetor. Fits your "M" thru "430" and replaces part numbers 30-739. Don't forget to replace the float when you rebuild your carburetor!
	Brand new fuel line kit for your M, MT, MI and MC! - NEW ARRIVAL! Code: M124 Weight: 1.00 Price: $25.00 Quantity in Basket: none
Featured is a brand new fuel line assembly for your John Deere "M", "MT", "MI", and "MC". It replaces part number AM707T and comes complete as shown, ready for your paint and finish. Fits the following applications: John Deere "M" (all) John Deere "MT" (all) John Deere "MC" (all) John Deere "MI" (all)
	Carburetor Rebuild Kit for TSX245, TSX475, TSX530 Code: MT105 Weight: 1.00 Price: $24.95 Quantity in Basket: none
Do the job right the first time. Our rebuild kit includes everything shown and will get your M, MC, MT, 40 or 320 carburetor rebuilt in no time!
	Itty Bitty Carburetor drill bit - 1/16"x 6" -You need this! Code: ST102 Weight: 0.10 Price: $9.95 Quantity in Basket: none
Are you the do-it-yourself kinda guy or gal? Want to repair and rebuild your own carburetor but haven't been able to locate the tiny drill bits necessary to drill out and clean the tiny air passages in your carburetor? One of the main problems you may encounter as you rebuild your carburetor is that you can't seem to get those air passages properly cleaned and if not cleaned properly chances are your tractor won't run right no matter how hard you worked on the carburetor. This drill bit will do the job with ease. We have two sizes available - 1/16"x 6" and 3/64" x 6". Do the job yourself and save some of your hard earned money, plus you'll have the satisfaction of knowing you did it yourself!
	Carburetor drill bit - 3/64"x6" Code: ST103 Weight: 0.10 Price: $9.95 Quantity in Basket: none
Are you the do-it-yourself kinda guy or gal? Like to repair and rebuild your own carburetor but haven't been able to locate the tiny drill bits necessary to drill out and clean the tiny air passages in your carburetor? One of the main problems you may encounter as you rebuild your carburetor is that you can't seem to get those air passages properly cleaned and if not cleaned properly chances are your tractor won't run right no matter how hard you worked on the carburetor. This drill bit will do the job with ease. We have two sizes available - 1/16"x6" and 3/64" x6". You are viewing the 3/64 x 6". Do the job yourself and save some of your hard earned money, plus you'll have the satisfaction of knowing you did it yourself! Need both sizes? Be sure and order our part number ST102!
	Brand New Carburetor Bowl for your 2-Barrel Carburetor - NEW ARRIVAL!!! Code: 50179 Weight: 2.00 Price: $32.97 Quantity in Basket: none
Those of us with tractors using a 2-barrel carburetor know how common it is for the bowl to either be cracked or rusted out. Luckily, we can help with a brand new bowl! Featured is a brand new bowl for your 2-barrel carburetor. It will be shipped to you as bare steel, ready for your paint and finish. It replaces part number A5173R and comes complete as shown. Fits the following applications: John Deere 50, 60, 70, 520, 530, 620, 630, 720 and 730
	Brand New Carburetor Choke Disc - NEW PRODUCT!!! Code: H750 Weight: 0.25 Price: $3.49 Quantity in Basket: none
Fantastic! Available now! Featured is a brand new carburetor choke disc. It replaces part numbers AR10065R, 27-558, R10027, P1123, 27-548 and AH11982H. These have been obsolete for many years. We're sure pleased to bring them to you now! Fits the following applications: John Deere "H" John Deere "B" (1,000-200,999) John Deere "420" John Deere "430"
	Brand New CORK Carburetor Float for your John Deere "D" - NEW PRODUCT!!! Code: D789 Weight: 0.50 Price: $29.95 Quantity in Basket: none
Featured is a brand new, CORK, carburetor float for your John Deere "D". It replaces part numbers AR10017R and X2231A. This float fits your DLTX-3 Carburetor only. This dandy new float is MADE IN THE USA! Fits the following application only: John Deere "D" (49,774-109,943 using a DLTX-3 Carburetor)
	Automatic Sediment Bowl Valve for your John Deere 50, 520, 530, 60, 620, 630, 70, 720 and 730!!! Code: 50799 Weight: 0.10 Price: $15.00 Quantity in Basket: none
Featured is a brand new aluminum valve for your tractor using an Automatic Sediment Bowl. This valve has been obsolete for many years and can be a problem as you restore your sediment bowl. Why not replace your broken or wore out valve with our new one? This valve replaces part number A4977R and fits the Automatic Sediment Bowl only. Fits the following applications: John Deere "50", "520", "530", "60", "620", "630", "70", "720" and "730" Stay tuned as we add more great new parts with you in mind!
	Carburetor Rebuild Kit for your John Deere 50, 520 and 530 - NEW ARRIVAL!!! Code: 50777 Weight: 0.50 Price: $21.95 Quantity in Basket: none
Is it time to rebuild the 2-barrel carburetor on your tractor? How about a complete kit to do the job right, the first time! Featured is a complete carburetor kit for your DLTX 86, 75, 83, 99 and 96 carburetors. Kit comes complete as shown and replaces part numbers AB4794R, AB4635R and AB4738R. This kit even comes with basic instructions to do the job. Don't feel like doing the job yourself? Just give us a call and we'll rebuild it for you! Fits the following tractors: John Deere 50, 520 and 530
	John Deere 420 and John Deere 430 Carburetor Connecting Rod - NEW ARRIVAL!!! Code: 420333 Weight: 1.00 Price: $12.50 Quantity in Basket: none
Featured is a brand new carburetor connecting rod. It replaces part number M3295T and will be shipped to you as shown, bare steel, ready for your paint and installation. This rod runs from the governor to the carburetor. Fits the following applications: John Deere 420 (ALL) John Deere 430 (ALL)
	John Deere 50, John Deere 60 and more Speed Control Plate with Linings - NEW ARRIVAL!!! Code: 50989 Weight: 2.00 Price: $25.99 Quantity in Basket: none
If your throttle handle has lost it's will to stay in place and you are using a bungie cord to keep it in place, then this new product is surely for you! Featured is a brand new speed control plate with linings. It replaces part number AA6077R and R227852. Part will be shipped to you as shown, complete with linings. What a deal! Fits the following applications: John Deere "50" (ALL) John Deere "60" (ALL) John Deere "70" (ALL) John Deere "520 (5200000 - 5208099) John Deere "620" (6200000 - 6213099) John Deere "720" (7200000 - 7214899) Stay tuned as we add more Speed Control Plates for all your other tractors!
	Brand New Throttle Rod for your John Deere M, MT, MI, MC, 40, 320 and 330 - NEW ARRIVAL!!! Code: M978 Weight: 1.00 Price: $9.95 Quantity in Basket: none
Available now! Featured is a brand new throttle rod for your tractor. It replaces part number M277T and will be shipped to you as bare steel, ready for your paint and installation. Although it is hard to see in the photo, it has a threaded end and a hole in the opposite end for your cotter pin. This rod runs from the governor to the carburetor. Fits the following applications: John Deere M John Deere MT John Deere MI John Deere MC John Deere 40 John Deere 320 John Deere 330
	Brand New Throttle Rod for your John Deere 50 - NEW ARRIVAL!!! Code: 50908 Weight: 1.00 Price: $19.95 Quantity in Basket: none
Available now! Featured is a brand new throttle rod for your tractor. It runs from the carburetor to the governor arm. It replaces part number B3217R. Part will be shipped to you as shown, bare steel, ready for your paint and installation. It comes complete with all machine work completed, including threaded end, factory bends and machined holes on the opposite end for your cotter pins. Fits the following applications: John Deere 50 (5015951-5020083) ALL FUEL TRACTORS ONLY John Deere 50 (5000000-5020083) GAS TRACTORS ONLY
	Brand New Carburetor Kit for your John Deere A - NEW ARRIVAL!!! Code: A908 Weight: 0.50 Price: $19.95 Quantity in Basket: none
Available now! Featured is a brand new carburetor kit for your John Deere A. It is a nice kit and even comes with basic instructions on how to do the job. We've even thrown in the carburetor mounting gaskets at no extra charge! This kit is complete and comes with everything shown, including: Carburetor mounting gaskets Stainless steel tipped needle and seat Throttle shaft Throttle shaft bushings Throttle shaft felt packing Float shaft Strainer gasket Bowl gasket Needle and seat gasket Throttle shaft screws ************************************************************************** This carburetor kit fits your Marvel Schebler DLTX 53 carburetor only. Fits the following tractor using a DLTX 53 carburetor: John Deere A (488,000-583,999)All fuel, of course. Did you know we have carburetor kits in stock for all of the 2-cylinder tractors? Just drop us an e-mail and we'll add the kit for your tractor, just for you!
	Brand New Carburetor Kit for your John Deere D - NEW ARRIVAL!!! Code: D908 Weight: 0.50 Price: $19.95 Quantity in Basket: none
Available now! Featured is a brand new carburetor kit for your John Deere D. It is a nice kit and includes basic instructions on how to do the job. We've even thrown in the carburetor mounting gaskets at no extra charge! This kit is complete and comes with everything shown, including: Carburetor mounting gaskets Stainless steel tipped needle and seat Throttle shaft Throttle shaft bushings Throttle shaft felt packing Float shaft Strainer gasket Bowl gasket Needle and seat gasket Throttle shaft screws ************************************************************************** This carburetor kit fits your Marvel Schebler DLTX 6, DLTX 16 and DLTX 63 carburetors only. Did you know we have carburetor kits in stock for all of the 2-cylinder tractors? Just drop us an e-mail and we'll add the kit for your tractor, just for you!
	Fuel Valve (3-way Valve) for your John Deere A, B, D and GP - NEW ARRIVAL!!! Code: D732 Weight: 2.00 Price: $79.95 Quantity in Basket: none
This is a great new product, years in the making! Featured is a brand new 3-way fuel valve for your John Deere A, B, D and GP. It replaces part number AD680R. Part is brand new and ready to install upon arrival. This 3-way valve connects to the sediment bowl, just like it did originally and allows you to switch from OFF, GAS or FUEL. This valve fits many different tractors so please check your application carefully: John Deere A (410,859-476,999) John Deere B (1,000-11,621) John Deere D (30,400-143,799) John Deere GP Stay tuned as we add more 3-way valves!
	Brand New Carburetor Kit for your John Deere B - IN STOCK!!! Code: B936 Weight: 0.50 Price: $19.95 Quantity in Basket: none
Available now! Featured is a brand new carburetor kit for your John Deere B. It is a nice kit and even comes with basic instructions on how to do the job. We've even thrown in the carburetor mounting gaskets at no extra charge! This kit is complete and comes with everything shown, including: Carburetor mounting gaskets Stainless steel tipped needle and seat Throttle shaft Throttle shaft bushings Throttle shaft felt packing Float shaft Strainer gasket Bowl gasket Needle and seat gasket Throttle shaft screws ************************************************************************** This carburetor kit fits your John Deere B with a Marvel Schebler DLTX 67 and DLTX 73 carburetor only. Did you know we have carburetor kits in stock for all of the 2-cylinder tractors? Just drop us an e-mail and we'll add the kit for your tractor, just for you!
	Carburetor Gasket Kit for your John Deere 50, 60, 70 and more! NEW ARRIVAL!!! Code: 60739 Weight: 0.10 Price: $3.99 Quantity in Basket: none
Available now! Featured is a brand new carburetor gasket kit for your tractor with a 2-barrel or dual-induction carburetor. This kit comes complete as shown and replaces part AA6343R. Fits the following applications: John Deere 50 John Deere 60 John Deere 70 John Deere 520 John Deere 530 John Deere 620 John Deere 630 John Deere 720 John Deere 730 If you don't need a complete carburetor kit, only the gaskets then save yourself some $$ and order this great new kit!
	Brand New Oil Pressure Gauge Pipe Kit for your John Deere 50, 60, 70 and more - NEW ARRIVAL!!! Code: 70369 Weight: 2.00 Price: $35.00 Quantity in Basket: none
Available now! Featured is a kit that will make your life so much easier! This kit includes everything you'll need to connect the oil lines to your Automatic Sediment Bowl. Replaces the following part numbers: AA4936R, AA5778R, B3305R, B3326R, B3306R, AA4937R, AR1312R, B3475R, R20732R, AA5532R, R20635R, A4990R, A4991R, A5090R, A5091R, F1518R, F1519R and F3100R. This kit includes all the fittings, ferrules, oil pipes, connectors and tees you'll need to run from the main case to the sediment bowl and from the sediment bowl to the oil pressure gauge. This kit is just for you folks with the Automatic Sediment bowl that has the oil line that runs to it that stops fuel to the tractor should the oil pressure become low. It is an important part of your tractor, get it hooked back up! Fits the following applications: John Deere 50 John Deere 520 John Deere 530 John Deere 60 John Deere 620 John Deere 630 John Deere 70
	Brand New Carburetor Kit for your John Deere A - NEW ARRIVAL!!! Code: A2134 Weight: 0.50 Price: $19.95 Quantity in Basket: none
Available now! Featured is a brand new carburetor kit for your John Deere A with a DLTX 71 or DLTX 72 carburetor. It is a nice kit and even comes with basic instructions on how to do the job. We've even thrown in the carburetor mounting gaskets at no extra charge! This kit is complete and comes with everything shown, including: Carburetor mounting gaskets Stainless steel tipped needle and seat Throttle shaft Throttle shaft bushings Throttle shaft felt packing Float shaft Strainer gasket Bowl gasket Needle and seat gasket Throttle shaft screws This kit contains the parts you'll need to rebuild your DLTX 71 and DLTX 72 carburetor. Did you know we have in stock, carburetor kits for all the 2-cylinder tractors? Don't see your application listed? Just drop us an e-mail and we'll add it to the Online Store for you!
	Brand New Fuel Line for your John Deere R - NEW ARRIVAL!!! Code: R737 Weight: 3.00 Price: $37.50 Quantity in Basket: none
Available now! Featured is a brand new fuel line for your John Deere "R". It replaces the original part number AR370R. Part will be shipped to you as shown, ready for your installation. This fuel line runs from the fuel tank to the sediment bowl. MADE IN THE USA! Sorry for the poor photo, this fuel line is really long! Fits the following application: John Deere R (All)
	Brand New Carburetor Rebuild Kit for your DLTX 10 Carburetor! - NEW ARRIVAL!!! Code: B1698 Weight: 1.00 Price: $19.95 Quantity in Basket: none
Available now! Featured is a brand new carburetor kit for your John Deere B. It is a nice kit and even comes with basic instructions on how to do the job. We've even thrown in the carburetor mounting gaskets at no extra charge! This kit is complete and comes with everything shown, including: Carburetor mounting gaskets Stainless steel tipped needle and seat Throttle shaft Throttle shaft bushings Throttle shaft felt packing Float shaft Strainer gasket Bowl gasket Needle and seat gasket Throttle shaft screws ************************************************ Please check your carburetor carefully. This carburetor kit will only fit the DTLX 10 carburetor!
	Carburetor Rebuild Kit for your John Deere 60, 620, 630, 70, 720 and 730 - NEW ARRIVAL!!! Code: 60740 Weight: 0.50 Price: $21.95 Quantity in Basket: none
NEW ARRIVAL!!! MADE IN THE USA!!! Is it time to rebuild the 2-barrel carburetor on your tractor? How about a complete kit to do the job right, the first time! Featured is a complete carburetor kit for your DLTX 81, 82, 84,85, 86, 94, 95, 96, 97, 98 and 99 carburetors. Kit comes with everything shown including: Bowl gasket and related repair gaskets Throttle shaft Needle and seat Throttle shaft bushings Screws for throttle shaft Float pin Throttle shaft felt packing Kit comes complete as shown and replaces part numbers AA5344R, AA5656R, AF1561R and AF1623R. This kit even comes with basic instructions to do the job. Don't feel like doing the job yourself? Just give us a call and we'll rebuild it for you! Fits the following tractors: John Deere 60, 620, 630, 70, 720 and 730
	Choke Rod for your John Deere A - NEW ARRIVAL!!! Code: A777 Weight: 5.00 Price: $17.50 Quantity in Basket: none
Available now! Featured is a brand new choke rod for your John Deere A. It replaces part number A4043R. Part will be shipped to you in bare steel, ready for your paint and installation. Fits the following application: John Deere A (643,750-662,728) Okay, so this choke rod doesn't fit many tractors but if you need it, we have it!
	Professionally Rebuilt DLTX 67 Carburetor for your John Deere B - IN STOCK!!! Code: BC67 Weight: 15.00 Price: $449.00 Quantity in Basket: none
Available now! Featured is a dandy carburetor that will make your life so much easier. Simply order it, install it and go! We've done all the hard work, this carburetor is rebuilt and ready to go! We normally don't have rebuilt carburetors available for purchase, particularly this carburetor as they can be tough to keep in stock. This one was sent to us by a customer who then realized he needed a different carburetor so we swapped it for him. It came to us with a broken stem. We've replaced the stem (we know how to do it right, don't worry) and then rebuilt it and test run it. It comes complete with mounting gaskets. This carburetor is in stock and ready to go. We can offer you a $100.00 core credit on this particular carburetor if you have a good core carburetor to send back to us. Even if it isn't a DLTX 67 carburetor, we'll be happy to help you. Just drop us an e-mail and we'll let you know what your carburetor's core value is. This carburetor is a DLTX 67 and has been rebuilt from top to bottom and of course, includes a new carburetor float. Fits the following application: John Deere B (201,000 and up) (Gas tractors only) If you need this carb, don't let it slip away. They are hard to find!
	New Carburetor Throttle Lever for your John Deere A, B and G - NEW ARRIVAL!!! Code: G678 Weight: 0.25 Price: $29.76 Quantity in Basket: none
Available now! Featured is a hard to find carburetor part. How about a brand new one? This Carburetor Throttle Lever mounts on the end of the throttle shaft on your carburetor. It is very common for it to be broken or missing as you restore your carburetor. This new part is MADE IN THE USA! This Carburetor Throttle Lever replaces part numbers AR10023R and X2648. Part will be shipped to you as shown, ready for your installation. Fits the following applications and carburetors: John Deere A John Deere B John Deere G Specifically, the following carburetor numbers: DLTX 8, 18, 53, 33, 34, 24 and 51