Bolt Kits, Hood Fasteners and more...

	Yoke Anchor Pin Code: 40112 Weight: 1.00 Price: $27.50 Quantity in Basket: none
This is a commonly damaged or missing part on the Dubuque series tractors. This Yoke Anchor Pin replaces part number M2711T and fits your John Deere 40-H, 40-W, 320, 330, 420 (with dual Touchomatic), 430 (with dual Touchomatic), 435, 440 and 1010. This pin goes through the rock shaft housing and holds the bracket that holds the third link.
	Upper Water Pipe Bolt Kit for your "H"!!!! Code: H333 Weight: 0.50 Price: $2.99 Quantity in Basket: none
New, reproduction upper water pipe bolts and lock washers for your John Deere H. Don't forget these if you have to replace your upper water pipe!
	Unstyled B Radiator Bolt kit Code: B290 Weight: 2.00 Price: $29.95 Quantity in Basket: none
Is it time to replace the core in your unstyled B radiator? We can make the job so much easier with this radiator bolt kit. Comes complete as shown. Pair it up with our new radiator core and your B will be good as new and at an affordable price as well!
	Sway Chain Anchor Bolt for your 40, 420, 430, 320, 330, 435 and 440! - NEW PRODUCT! Code: 420138 Weight: 1.00 Price: $9.95 Quantity in Basket: none
Everybody needs one or two of these! Featured is a brand new sway chain anchor bolt. This bolt attaches the chain anchor to the draft link and yoke on your 3-point hitch. Replaces part number M2084T, two (2) required per tractor. Fits the following applications: John Deere 40, 420, 430, 320, 330, 435 and 440
	Sway chain anchor - Great New Product! Code: 420122 Weight: 1.00 Price: $25.00 Quantity in Basket: none
Until now, this part has been almost impossible to find. Commonly broken, good used ones were far and few between. We're pleased to offer to you a new reproduction casting of the orignal part M2876T. This is a sway chain anchor, bolts to the drawbar of your 40-W, 420-W, 430-W, 435, 440 and 1010. It also fits the 420-I. Each tractor requires two of this anchor, please be sure and order enough to do your tractor. We have a very limited supply of this part. Keep watching the online store for more reproduction hitch and drawbar parts, over the next few weeks we'll be introducing even more new parts!
	Seat spring bolt for your "A", "B", and "G" - GREAT NEW PRODUCT! Code: A197 Weight: 1.00 Price: $15.00 Quantity in Basket: none
Been searching high and low for a brand new seat spring bolt for your restoration? Look no more, we can fix you right up! Featured is a brand new seat spring bolt for your favorite tractor. This bolt runs through the seat spring. It replaces part number 8H1268R and A619R and is, of course, proudly made right in the good ol' USA! Fits the following tractors: John Deere "A" (410,000-583,999) John Deere "B" (1,000-200,999) John Deere "G" and "GM" (1,000-25,999)
	Seat Channel Support Pin - Brand new! - ON SALE NOW for a Limited time! Code: G121 Weight: 1.00 Price: $9.95 Quantity in Basket: none
Has a sloppy seat ruined your restoration efforts? We can help! Featured is the pin that runs through the seat channel support bracket. This is a commonly wore out part and impossible to find as a good used part. We're pleased to bring them to you now! This pin fits the following tractors: A, B, D, G and GP. Replaces part number C1980R.
	Seat Channel Pin - NEW PRODUCT! Code: H167 Weight: 0.40 Price: $12.50 Quantity in Basket: none
The seat bracket that mounts to your platform is an important part of your tractor's restoration. Featured is a brand new seat pin, replacing part number H372R. The next time you are at a show, take a gander at the tractor sitting next to yours. This pin is many times overlooked but a very important restoration detail.
	Seat adjuster pin assembly Code: M125 Weight: 1.00 Price: $19.50 Quantity in Basket: none
Nice, reproduction seat latch assembly, comes complete as shown and will fit any Dubuque built tractor; M thru 430.
	Radiator Bolt Kit for your Unstyled "A" - NEW ARRIVAL! Code: A1322 Weight: 3.00 Price: $29.95 Quantity in Basket: none
Featured is a brand new product bound to make your life easier! You are viewing a complete radiator bolt kit for your Unstyled "A". It comes complete as shown with brand new, original style square head bolts and nuts. Don't forget to check out our other bolt kits, we're working to bring you more products just like this to make your restoration efforts so much easier!
	Radiator bolt kit for your "H"! Code: H354 Weight: 2.00 Price: $29.95 Quantity in Basket: none
Boy, this product sure makes the job of restoring your "H" radiator much easier. Comes complete as show with everything you'll need to do the job right. If you are replacing your original leaky radiator core with one of our new replacement radiator cores, don't forget the bolt kit!
	Radiator bolt kit for your John Deere "A"! Code: A194 Weight: 2.00 Price: $29.95 Quantity in Basket: none
Is it time to replace that leaky radiator core in your tractor? Be sure and check out our prices on radiator cores! We have the best prices and best core on the market today! Don't forget to replace those bolts when you purchase a new core. This radiator bolt kit comes complete with everything you'll need to do the job right including a detailed schematic which makes the job a more bearable task! This radiator bolt kit will fit your John Deere A serial number 488,000 and up. Any questions about this or any of our products? Don't ever hesitate to phone us at 417-933-2253 or drop us an e-mail!
	Radiator Bolt kit - NEW ITEM! Code: B503 Weight: 2.00 Price: $29.95 Quantity in Basket: none
Featured is the complete radiator bolt kit for John Deere B (60,000 and up). This bolt kit has it all, even includes the studs. All the bolts are the correct length and correct head and kit comes with a schematic as well. This is a fantastic kit at a great price. Don't search all over town only to get the run around, simply order our kit!
	Powertrol Cylinder Bolt Code: B237 Weight: 0.25 Price: $0.50 Quantity in Basket: none
JD part number B1152R - machine cap screw measuring 1/2"x1 1/2" for your PowerTrol unit.
	Platform screw set Code: B316 Weight: 0.25 Price: $6.99 Quantity in Basket: none
These are for all you folks who have searched high and low or spent hours restoring your original platform bolts because new ones were not available. We're pleased to offer this platform screw set which comes complete as shown with the correct head and length screws and it even includes the washers! This platform screw set will fit the late B, late A, late B, 50 - 730. Will fit basically any tractor that you sit on the battery box. Will not work on the standard tractors.
	Pan Seat Spring Bolt for your John Deere "H" - NEW PRODUCT! Code: H751 Weight: 1.00 Price: $7.50 Quantity in Basket: none
We love this new product! Featured is a brand new bolt which runs through the seat spring on your "H". It replaces part number H373R. Comes as shown, ready for your paint and finish. Fits the following application: John Deere "H" (All)
	Pan Seat bolt and nut Code: B159 Weight: 0.75 Price: $2.99 Quantity in Basket: none
Featured is a brand new pan seat bolt and nut for your John Deere tractor using a pan seat.
	New Old Stock (NOS) - Pins - HAVE ONLY TWO LEFT!!! Code: NOS119 Weight: 0.25 Price: $2.00 Quantity in Basket: none
NOS (New Old Stock) package of two (2) pins, John Deere part number R39179.
	Manifold stud nut - NEW PRODUCT - ON SALE NOW!!! Code: H451 Weight: 0.10 Price: $0.99 Quantity in Basket: none
Featured is a wonderful restoration part for your tractor. It is the manifold stud nut just like your tractor used originally. It features oversized shoulders. Don't forget to order the nuts when you replace your stud bolts. It's always easier to do the job right the first time! Fits your John Deere H, A and B using a 7/16" stud.
	John Deere B Hydraulic Cylinder Stop Pin - NEW PRODUCT! Code: B429 Weight: 1.00 Price: $25.00 Quantity in Basket: none
We love this new product! Featured is a new stop pin for the external hydraulic cylinder on your John Deere B. It replaces part numbers AB3382R, D2913R and A3184R. This stop pin comes complete as shown and fits the following hydraulic cylinder with the casting number of B2161R.
	Hood Fastener with pin for your John Deere M and more! - Short - IN STOCK!!! Code: M328 Weight: 0.50 Price: $2.99 Quantity in Basket: none
If the hood fasteners on your M, MT, MI, MC, 40, 420, 430, 320 and 330 have seen better days then worry no more. Check out our great low price on this new product. This particular kit will come with one fastener and one pin. We've featured the top of the head in the photo so you can see the attention to detail. Did you know these were made right here in Missouri? Wouldn't you rather have MADE IN AMERICA parts on your tractor rather than parts made overseas? I don't know about you but every chance I get to support the good ol' USA I'm going to do it. Plus, at this price we've got those foreign made products beat. So do your country right and your tractor right and keep those extra dollars in your own billfold! This particular pin is the short pin and replaces part numbers M315T and M316T. We have the long pin as well, just check out our part number M327. They are plated just like the original as well. Replace only what you need, these little devils are sold individually. Fits the following applications: John Deere M, MT, MI, MC , 40, 420, 430, 320 and 330
	Hood Fastener with Pin for your John Deere M and more! - Long -BACK IN STOCK!!! Code: M327 Weight: 0.50 Price: $2.99 Quantity in Basket: none
If the hood fasteners on your M, MT, MI, MC, 40, 420, 430, 320 and 330 have seen better days then worry no more. Check out our great low price on this new product. This particular kit will come with one fastener and one pin. We've featured the top of the head in the photo so you can see the attention to detail. Did you know these were made right here in Missouri? Wouldn't you rather have MADE IN AMERICA parts on your tractor rather than parts made overseas? I don't know about you but every chance I get to support the good ol' USA I'm going to do it. Plus, at this price we've got those foreign made products beat. So do your country right and your tractor right and keep those extra dollars in your own billfold! This particular pin is the long pin and replaces part number M322T. We have the short pin as well, just check out our part number M328. They are plated just like the original as well. Replace only what you need, these little devils are sold individually. Fits the following applications: John Deere M, MT, MI, MC , 40, 420, 430, 320 and 330
	Hood Bolt Kit for your Diesel Tractor - NEW PRODUCT! Code: R214 Weight: 1.00 Price: $14.75 Quantity in Basket: none
This is one of those parts that if you have an "R", "80", "820" or "830", you've fought and "cussed" these bolts. Featured is a complete hood bolt kit for your tractor, comes complete as shown and is sold individually. Order only what you need. Replacing them all? Order four (4). Kit comes complete as shown and replaces part numbers R1068R, R21652R, R1117R 24H143R and A4735R. Fits the following applications: John Deere "R" (5530 and up) John Deere "80" (all) John Deere "820" (all) John Deere "830" (all) Order our kit and get that hood tied down nice and snug like it was when it was new!
	Front Axle Pin Code: M128 Weight: 1.00 Price: $17.00 Quantity in Basket: none
Hard to find part! This front axle pin is a reproduction of part number M1387T, comes complete as shown with cotter pin. Two (2) pins required per tractor. Fits your John Deere 320, 330, 40-S, 40-U, 40-T, 420, 430, M, MT and 1010. Should you have any questions concerning this or any of our products, don't hesitate to give us a call at (417)933-2253. We look forward to hearing from you soon!
	Drawbar Lock Pin and Lock Pin Handle Code: M133 Weight: 2.00 Price: $35.00 Quantity in Basket: none
Another great new restoration part, just for you! Featured is a lock pin and lock pin handle. This part holds the drawbar in place and replaces part numbers M485T and M486T. This part fits your John Deere "M" only.
	Drawbar lift link pin with spring - BACK IN STOCK!!!! Code: MT115 Weight: 0.50 Price: $12.50 Quantity in Basket: none
These have been hard if not impossible to find as a good used part so we're pleased to offer them to you now as a high quality reproduction part! Designed for the M and MT, you'll need four per tractor or simply replace the ones you may have damaged or missing.
	Complete Bolt kit for your John Deere 50, 60 and 70 - BACK IN STOCK!!! Code: 70567 Weight: 5.00 Price: $49.95 Quantity in Basket: none
NO MORE DIGGIN' THROUGH THE BUCKETS OF BOLTS!!! You asked for it and we did it! Featured is a brand new bolt kit for your favorite tractor. It comes as featured with all the hardware you'll need as you restore the hood, grille assembly, dash and flywheel cover on your tractor. It comes with a detailed,3-page schematic which is a real plus. Bolts, springs, washers. spacers, lock washers, shakeproof washers, nuts and much more are included in this kit. This kit features the clutch head bolts your tractor used originally. Do it right the first time! Fits the following applications: John Deere "50" - (All) John Deere "60" - (All) John Deere "70" - (All) This kit is worth every penny, it has everything you need!
	Clutch Head Screwdriver - BACK IN STOCK!!!! Code: ST117 Weight: 1.00 Price: $14.99 Quantity in Basket: none
You've asked us for years for a clutch head screwdriver and we've found you a good one at a good price too! Featured is a brand new screwdriver designed just for the clutch head screws found fastening the sheet metal to your tractor. The head of this screwdriver matches those clutch head screws perfectly! This screwdriver is well made and will be a welcome addition to your tool box. Order one for you and one for a buddy!
	Brand New Radiator Bolt Kit for your 50 - NEW ARRIVAL!!! Code: 50877 Weight: 2.00 Price: $29.95 Quantity in Basket: none
Available now! Featured is a complete bolt kit for the radiator on your John Deere "50". It comes with everything you'll need to do the job right. No need to run to the hardware store or digging through buckets full of mystery bolts only to discover you still don't have what you need. Our kit comes complete as shown with all the cap screws, studs and nuts pictured. Now get to work and get that radiator back together!
	Bolt Kit for your "H" - NEW PRODUCT AND SUPER LOW PRICE! Code: H601 Weight: 1.50 Price: $19.95 Quantity in Basket: none
Available now! Featured is a complete sheet metal bolt kit for your John Deere "H". This kit comes complete as shown with everything you'll need to do the job right. No more diggin' through the bolt buckets to find that bolt or washer. We've got it all for you in one dandy kit. It even includes the cushions for the medallion. Each kit comes with a schematic as to where each and every piece goes. Great kit at a super low price!
	Be Careful Plate Screw for the Battery Box on your John Deere A, B, G, 50 and more! - NEW ARRIVAL!!! Code: B838 Weight: 0.10 Price: $0.99 Quantity in Basket: none
We just love making your life easier! We can't mow the yard or wash the car for you but we can make your tractor restoration efforts so much easier! Featured is a brand new Stainless Steel Screw. This screw holds the "Be Careful Plate" onto the battery box of your tractor. Although it's hard to see in the photo because this screw is so darned tiny, the head of this screw is a slotted pan screw, just like the original. Two (2) are required per tractor, but sold individually so order accordingly. Fits the following applications: John Deere "A", "B", "G", "50", "520", "530", "60", "620", "630", "70", "720", "730", "R", "80", "820" and "830".
	New Flywheel Bolt Lock Plate for your John Deere M, MT, MC, MI, 40, 420, 430, 320 and 330! Code: 40800 Weight: 0.25 Price: $3.49 Quantity in Basket: none
Odds are good you need this new product, but you may not know it yet. When you tear your tractor down during restoration, you'll find this Lock Plate either missing, damaged or completely wore beyond using it again. The bolts that keep your flywheel on are actually held in place by this plate. Two (2) are required per tractor but sold individually, order only what you need. This new part will be shipped to you as bare steel and replaces part numbers M23T and AM646T. Fits the following applications: John Deere "M", "MT", "MI", "MC", "40", "420", "430" and "320" and "330"
	New Wiring Harness Clip for your John Deere A, B, G, D and more! NEW ARRIVAL!!! Code: B566 Weight: 0.10 Price: $1.99 Quantity in Basket: none
Available now! Featured is a brand new wiring harness clip for your tractor. This brand new clip replaces part number B1986R. Part will be shipped to you as shown, bare steel, ready for your paint and installation. This wiring clip is used only where the wiring harness runs under the fan stand and over to the voltage regulator. It is a very specialized wiring harness clip. Never seen an original one? This part has been hard to find in the past so we've made a brand new one, just for you! Fits the following applications: John Deere A John Deere B John Deere G John Deere D John Deere 50 John Deere 520 John Deere 530 John Deere 60 John Deere 620 John Deere 630 John Deere 70 John Deere 720 John Deere 730
	Brand New Rubber Fuel Tank Grommet for your John Deere M, MT, MC and MI - NEW ARRIVAL!!! Code: M1343 Weight: 0.05 Price: $0.75 Quantity in Basket: none
Available now! Featured is a brand new fuel tank grommet for your tractor. This dandy little grommet installs in the holes in your gas tank edges and tank brackets. Eight (8) are required per tractor but are sold individually. Only order what you need. This new grommet replaces part number M305T. Fits the following applications: John Deere M John Deere MT John Deere MC John Deere MI
	Radiator Bolt kit for your Unstyled John Deere G - NEW ARRIVAL!!! Code: G987 Weight: 2.00 Price: $29.95 Quantity in Basket: none
Available now! Featured is a brand new radiator bolt kit for your Unstyled G. This bolt kit contains everything you'll need to rebuild the radiator on your tractor. MADE IN THE USA!!! Don't even think about trying to re-use those 70+ year old bolts in your current core! Fits the following application: John Deere G (1,000-12,999)
	Brass Manifold Stud Nut for your Unstyled John Deere A and B - NEW ARRIVAL!!!! Code: B1456 Weight: 0.10 Price: $1.99 Quantity in Basket: none
Available now! Featured is a beautiful new product for your Unstyled A and Unstyled B. This 7/16" brass nut is for your manifold studs. MADE IN THE USA!!! Fits the following applications: John Deere A (Unstyled only) John Deere B (Unstyled only)